歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

操作噴淋清洗機時建議注意多個細節

作者：admin來源：http://www.zhuohengsh.com/時間：2022-07-23

我們知道，噴淋清洗機是通過動力裝置使高壓柱塞泵產生高壓水來沖洗物體表面的機器。它能將污垢剝離、沖走，達到清洗物體表面的目的。操作噴淋清洗機時建議注意多個細節，具體內容：

As we know, the spray cleaning machine is a machine that uses the power device to make the high-pressure plunger pump produce high-pressure water to wash the surface of objects. It can peel off and wash away the dirt, so as to achieve the purpose of cleaning the surface of the object. When operating the spray washer, it is recommended to pay attention to several details, specifically:

1、當操作噴淋清洗機時：始終需戴適當?shù)淖o(hù)目鏡，手套和面具。

1. When operating the spray washer: always wear appropriate goggles, gloves and masks.

2、始終讓保持手和腳不接觸清洗噴嘴。

2. Always keep hands and feet away from the cleaning nozzle.

3、經常要檢查所有的電接頭。

3. Always check all electrical connectors.

4、經常檢查所有的液體。

4. Check all liquids frequently.

5、經常檢查軟管是否有裂縫和泄漏處。

5. Always check the hose for cracks and leaks.

6、當未使用噴槍時，總是需將設置扳機處于安全鎖定狀態。

6. When the spray gun is not used, always put the setting trigger in a safe locking state.

7、總是盡可能地使用低壓力來工作，但這個壓力要能足以完成工作。

7. Always use low pressure to work as much as possible, but this pressure should be enough to complete the work.
噴淋清洗機

8、在斷開軟管連接之前，總是要先釋放掉清洗機里的壓力。

8. Always release the pressure in the washer before disconnecting the hose.

9、每次使用后總是要排干凈軟管里的水。

9. Always drain the water in the hose after each use.

10、決不要將噴槍對著自己或其他人。

10. Never point the spray gun at yourself or others.

11、在檢查所有軟管接頭都已在原位鎖定之前，決不要啟動設備。

11. Never start the equipment until you check that all hose connections are locked in place.

12、在接通供應水并讓適當?shù)乃鬟^(guò)噴槍桿之前，決不要啟動設備。然后將所需要的清洗噴嘴連接到噴槍桿上。

12. Never start the equipment before connecting the supply water and letting the appropriate water flow through the shotgun barrel. Then connect the required cleaning nozzle to the spray gun rod.

每次當你釋放扳機時泵將運轉在旁路模式下。如果一個泵已經在旁路模式下運轉了較長時間后，泵里循環水的過高溫度將縮短泵的使用壽命甚至損壞泵。所以，應避免使設備長時間運行在旁路模式。

Each time you release the trigger, the pump will run in bypass mode. If a pump has been running in bypass mode for a long time, the excessive temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, long-term operation of the equipment in bypass mode should be avoided.

做到上述幾點，相信你的清洗機可以發揮更大的效力。更多噴淋清洗機的相關知識，關注我們www.zhuohengsh.com，讓你的清洗機發揮大的優勢！

Do the above, I believe your cleaning machine can play a greater role. For more knowledge about spray cleaning machines, pay attention to us at www.zhuohengsh.com, so that your cleaning machine can play a big advantage!

上一篇：全自動機械清洗機使用優勢見解
下一篇：全自動超聲波清洗機的清洗效果與工作效率