歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

一種通過式噴淋清洗機及其清洗方法

作者：admin來源：http://www.zhuohengsh.com/時間：2022-06-01

這里的通過式噴淋清洗機包括主機架和固定連接在主機架一側的子架。主機架上部設有一組首尾相連的下殼體，上殼體與下殼體配合設置。下蓋的開口相對固定連接，形成供清洗籃通過的通道。該通道從前到后分為進料口、噴淋室、干燥室和出料口。該通道配有傳送清潔籃的傳動裝置。設備。

The through type spray cleaning machine here comprises a main frame and a sub frame fixedly connected to one side of the main frame. The upper part of the main frame is provided with a group of lower shells connected end to end, and the upper shell is matched with the lower shell. The opening of the lower cover is relatively fixedly connected to form a channel for the cleaning basket to pass through. The passage is divided into feed inlet, spray chamber, drying chamber and discharge outlet from front to back. This channel is equipped with a drive to transfer the cleaning basket. Equipment.

霧化室上端設有除霧裝置，干燥室通過風道與熱循環風機相連，副架上設有一組藥液罐和水罐，與噴房相連。有電加熱管，藥液箱和水箱通過出水管路與高壓噴淋泵進口連接，高壓噴淋泵出口通過布袋除塵器連接。布袋除塵器與設置在霧化室內的噴淋器連接。淋浴集成管道連接。

The upper end of the atomization chamber is equipped with a demister, the drying chamber is connected with the thermal circulation fan through an air duct, and a group of liquid medicine tanks and water tanks are set on the sub frame, which are connected with the spray room. There is an electric heating pipe, the liquid medicine tank and water tank are connected with the inlet of the high-pressure spray pump through the water outlet pipeline, and the outlet of the high-pressure spray pump is connected through the bag filter. The bag type dust collector is connected with the sprayer arranged in the atomization room. Shower integrated piping connections.

該產品的有益效果是通過在開模（脫模）前增加噴淋清洗工序，可以更好地清洗附著在玻璃模具非工作面的原材料，降低后續工序的清洗依從性，并提高成本。生產效率高，整機結構設計合理，密封效果好，可防止漏液、漏氣，便于操作、維護和清洗。

The beneficial effect of the product is that by adding a spray cleaning process before mold opening (demoulding), the raw materials attached to the non working surface of the glass mold can be better cleaned, the cleaning compliance of the subsequent process can be reduced, and the cost can be increased. It has high production efficiency, reasonable structure design and good sealing effect, which can prevent liquid and gas leakage, and is convenient for operation, maintenance and cleaning.

另外，當光學鏡片處于清洗介質噴淋狀態時，用清洗劑噴淋和清水清洗后，再用熱風吹干，對光學鏡片表面進行清洗，對玻璃模具和玻璃進行清洗。樹脂鏡片得到改進。度，提高生產效率，降低成本。

In addition, when the optical lens is in the cleaning medium spray state, spray it with cleaning agent and clean it with water, and then dry it with hot air to clean the surface of the optical lens, and clean the glass mold and glass. The resin lens has been improved. Degree, improve production efficiency and reduce costs.

該產品還提供了一種通過式噴淋清洗機的清洗方法，包括以下步驟：

The product also provides a cleaning method of a through spray cleaning machine, which includes the following steps:

用清洗劑配制清洗液，清洗液含有60-80%的水和20-40%的中性清洗劑，兩者之和為100%；

Prepare cleaning solution with cleaning agent. The cleaning solution contains 60-80% water and 20-40% neutral cleaning agent, and the sum of the two is 100%;
噴淋清洗機

藥液罐加入清洗液，水罐加清水后，控制器控制電熱管開始加熱藥液罐和水罐內的液體，使溫度達到工作溫度85℃±5℃；當水箱和水箱加熱時，控制器控制加熱管和熱循環風機啟動，對烘房進行預熱，使室內溫度達到烘房溫度；

Add cleaning liquid to the liquid medicine tank and add clean water to the water tank. The controller controls the electric heating tube to heat the liquid in the liquid medicine tank and the water tank to make the temperature reach the working temperature of 85 ℃± 5 ℃; When the water tank and the water tank are heated, the controller controls the heating pipe and the thermal circulating fan to start to preheat the drying room so that the indoor temperature reaches the drying room temperature;

將玻璃模具放入清洗籃中，將清洗籃置于清洗機進料口，控制器控制減速電機啟動，清洗籃由傳動裝置輸送至清洗機內部進行清洗。加工;

Put the glass mold into the cleaning basket, place the cleaning basket at the feeding port of the cleaning machine, the controller controls the start of the reduction motor, and the cleaning basket is transported to the inside of the cleaning machine by the transmission device for cleaning. Processing;

清洗籃開始輸送后，控制器控制高壓噴淋泵啟動，在噴淋室內依次用藥液和清水清洗玻璃模具。同時，液位控制器的探頭采集藥液罐或水罐內的水位信息并傳輸。對于液位控制器，液位控制器判斷是液箱還是水箱需要注液。如果液位控制器需要控制電磁閥打開加液，如果沒有，電磁閥關閉；

After the cleaning basket starts to be transported, the controller controls the start of the high-pressure spray pump, and cleans the glass mold with liquid and clean water in the spray room in turn. At the same time, the probe of the liquid level controller collects and transmits the water level information in the liquid medicine tank or water tank. For the level controller, the level controller determines whether the liquid tank or the water tank needs to be filled with liquid. If the liquid level controller needs to control the solenoid valve to open and add liquid, if not, the solenoid valve will close;

玻璃模具清洗干凈后，進入烘房。在烘房內，對玻璃模具進行熱風風切干燥處理15-30分鐘；玻璃模具干燥后，通過出料口離開清洗機。

After the glass mold is cleaned, enter the drying room. In the drying room, the glass mold shall be cut and dried by hot air for 15-30 minutes; After the glass mold is dried, it leaves the cleaning machine through the discharge port.

一種通過式噴淋清洗機及其清洗方法的相關內容講解完畢，您可以來我們網站www.zhuohengsh.com關注相關資訊，更好的使用清洗機進行工作！

After explaining the relevant contents of a pass through spray cleaning machine and its cleaning method, you can come to our website www.jnthcsb Pay attention to relevant information and better use the cleaning machine!

上一篇：超聲波清洗設備的正確操作程序
下一篇：清洗機選擇清洗方法時要考慮到幾種情況