歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

噴淋清洗機工藝設計要根據什么因素來做？

作者：admin來源：http://www.zhuohengsh.com/時間：2023-03-22

噴淋清洗機在制造業中出現的形式多樣，應用范圍廣泛。在其除油清洗的應用也有結合超聲波清洗組成清洗烘干線，而在超聲波除油、切削的清洗工藝中其一般作為漂洗工序段，采用自動形式，以減少成本，且能達到效果。那么噴淋清洗機工藝設計要根據什么因素來做呢？

Spray cleaning machines appear in various forms and have a wide range of applications in the manufacturing industry. In its application of oil removal and cleaning, ultrasonic cleaning is also used to form a cleaning and drying line. In the cleaning process of ultrasonic oil removal and cutting, it is generally used as a rinsing process section in an automatic manner to reduce costs and achieve results. So what factors should be considered in the process design of spray cleaning machines?

（1）根據要噴淋清洗工件的污垢具體特點

(1) According to the specific characteristics of the dirt on the workpiece to be sprayed and cleaned

在設計一個清洗工藝時，首先要對污垢的性質、數量以及在清洗表面附著的情況進行了解。通常的清洗工藝和設備都是針對特定的污垢而設計的，一般是先用經濟的方法將大部分污垢除去，然后用其他的方法對殘留的污垢進行處理，用分步進行的方法組成一個清洗工藝。

When designing a cleaning process, it is important to first understand the nature, amount, and adhesion of dirt on the cleaning surface. Generally, cleaning processes and equipment are designed for specific dirt. Generally, most dirt is removed using economic methods, and then residual dirt is treated using other methods. A step-by-step method is used to form a cleaning process.

（2）對噴淋清洗洗凈程度的要求

(2) Requirements for cleaning degree of spray cleaning

在選擇清洗工藝及設備時，必須考慮清洗要求達到的噴淋洗凈程度。對不同洗凈程度要求的清洗應選擇不同的清洗工藝和設備。洗凈程度要求越高，清洗成本也越高，而且生產成本是以幾何級數遞增的，但是在某些情況下，為了避免出現因清洗效果不佳而造成損失，選擇成本高的清洗工藝和設備也是有必要的，自然就不會把生產的經濟性放在首位了。

When selecting cleaning processes and equipment, the degree of spray cleaning required for cleaning must be considered. Different cleaning processes and equipment should be selected for cleaning with different cleaning requirements. The higher the requirement for cleaning degree, the higher the cleaning cost, and the production cost increases in geometric progression. However, in some cases, in order to avoid losses caused by poor cleaning effect, it is also necessary to choose high cost cleaning processes and equipment, which naturally does not place production economy in the first place.
噴淋清洗機

此外噴淋清洗機在使用過程中速度快且操作效果統一，并且其設備內槽與外槽都是使用不銹鋼進行制作的。由于設備的工作時間、溫度以及功率都是可以自行調節的，因此設備對生產效率的提高有著很大的幫助，并且在一定程度上可以節約不少生產成本。

In addition, the spray cleaning machine is fast in use and has a uniform operating effect, and both the inner and outer grooves of the equipment are made of stainless steel. Due to the fact that the working time, temperature, and power of the equipment can be adjusted by itself, the equipment can greatly help improve production efficiency, and to some extent can save a lot of production costs.

在使用噴淋清洗機設備的過程中，其清洗機的儲液箱在槽中沒有水或者是溶劑的時候需要對其進行更換，同時在更換的過程對電箱要多加小心，并進行正確的操作及維護保養工作。

During the use of spray cleaning machine equipment, when there is no water or solvent in the tank of the cleaning machine's liquid storage tank, it is necessary to replace it. At the same time, during the replacement process, it is necessary to pay more attention to the electric box, and carry out correct operation and maintenance work.

正是因為噴淋清洗機設備具有工位多、功能齊全、結構合理、操作方便以及清洗效果好等顯著的性能特點，因此對于大批量工件的清洗是非常不錯的選擇。不過同樣在操作過程中對于一些操作設備該注意的問題還是需要多加了解并注意，才能夠更好的操作使用設備。您有需求就來咨詢我們http://www.zhuohengsh.com吧！

It is precisely because the spray cleaning machine equipment has significant performance characteristics such as multiple stations, complete functions, reasonable structure, convenient operation, and good cleaning effect that it is a very good choice for cleaning large quantities of workpieces. However, it is also necessary to understand and pay attention to some issues that should be paid attention to during the operation process in order to better operate and use the device. If you have any needs, please come to consult us http://www.zhuohengsh.com Come on!

上一篇：多槽手動超聲波清洗機的技術特點
下一篇：低溫廢水回收設備到底是怎樣的產品？