1、數控機床控制面板加熱

1. Heating control panel of CNC machine tool

普通試驗室使用的CNC機床清洗機，超聲波清洗機廠家含有加熱功能的型號，即CNC機床按功能鍵加熱。數控機床區表明當今溫度，能夠設置溫度值，當做到加熱值是全自動終止加熱。此類加熱一般是用環氧樹脂板加熱。

CNC machine tool cleaning machine used in ordinary laboratory, ultrasonic cleaning machine manufacturer contains heating function model, that is, CNC machine tool heating by function key. CNC machine area shows the current temperature, can set the temperature value, when the heating value is fully automatic stop heating. This kind of heating is usually made of epoxy resin board.

2、溫控儀加熱

2. Temperature controller heating

分體式超聲波清洗機依據應用狀況有效溫控儀加熱，操作方法以下：按住加熱電源開關，溫控儀將表明測量溫度與操縱溫度。上邊表明的是測量溫度，下邊表明的是操縱溫度，當測量溫度小于操縱溫度時，溫控儀上out燈亮了，加熱顯示燈亮，機器設備處在加熱情況;當測量溫度高過操縱溫度時，溫控儀上out燈滅，加熱顯示燈滅掉，機器設備終止加熱。操縱溫度設定方式：按撥碼鍵設置操縱溫度，，操縱溫度為58度。此類一般是用加熱管加熱。

The operation method is as follows: press and hold the heating power switch, the temperature controller will indicate the measured temperature and the operating temperature. When the measured temperature is less than the operating temperature, the out light on the temperature controller is on, the heating display light is on, and the machine is in the heating condition; When the measured temperature is higher than the operating temperature, the out light on the temperature controller is off, the heating display light is off, and the heating of the machine and equipment is terminated. Operating temperature setting mode: press the dial key to set the operating temperature, and the operating temperature is 58 degrees. This kind of heating pipe is generally used for heating.

3、機械設備溫度控制

3. Temperature control of mechanical equipment

普通臺式清洗機一般采用機械設備的溫控，即旋紐調節溫度，如kq-250e型臺式清洗機，其溫控范圍為常溫下-80度。

Ordinary desktop cleaning machine generally adopts the temperature control of mechanical equipment, that is, the knob to adjust the temperature. For example, kq-250e desktop cleaning machine, its temperature control range is - 80 ℃ under normal temperature.

今日超聲波清洗設備的精彩內容就給大家分享到這了，更多的精彩內容請點擊我們的網站http://www.zhuohengsh.com留言，或者直接撥打電話詢問，我們會有專門的人員為您服務.

Today's wonderful content of ultrasonic cleaning equipment will be shared with you. For more wonderful content, please click our website http://www.zhuohengsh.com Leave a message, or call directly, we will have special staff to serve you